A ROPS should never be modified
by welding, grinding or cutting, as
this can weaken the ROPS structure.
If any components of the ROPS unit
is damaged, it must be replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be fitted back to their original posi-
tions and all bolts should be properly
torqued.
21. Extra caution should be taken
when driving tractors with nar-
row tread widths. For added
stability you should adjust your
rear wheel tread width, see page
4-25.
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position and park-
ing brake is applied.
20. For your safety ROPS with a
seat belt is recommended for all
applications.
051O106C 051O107C
Always use seat belt when the
tractor is equipped with a ROPS.
Never use the seat belt when
tractor is not equipped with a
ROPS or ROPS is folded up.
•
NOTE
To Next Page
Loading...
