A ROPS should never be modified
by welding, grinding or cutting, as
this can weaken the ROPS structure.
If any components of the ROPS unit
is damaged, it must be replaced.
If the ROPS unit is removed or loos-
ened for any reason, the parts should
be fitted back to their original posi-
tions and all bolts should be properly
torqued.
21. Extra caution should be taken
when driving tractors with narrow
tread widths. For added stability
you should adjust your rear wheel
tread width, see page 5-39.
19. Before starting your tractor you
should depress the clutch and
make sure that all shift levers are
in the neutral position.
20. For your safety
ROPS with a seat
belt is recommended for most
applications.
(1) Tread
621O106a 621O107a
NOTE
Always use seat belt when the
tractor is equipped with a ROPS.
Never use the seat belt when
tractor is not equipped with a
ROPS.
(ROPS: Roll-Over Protective
Structures)
To Next Page
Loading...
