4. Observe all local trafc and safe-
ty regulations.
5. Turn the headlights on. Dim them
when meeting another vehicle.
6. Drive at speeds that allow you to
maintain control at all times.
7. Do not apply the differential lock
while traveling at road speeds.
As the tractor may run out of con-
trol.
8. Avoid sudden movements of the
steering wheel as this can cause
a loss of control of the tractor.
This risk is especially great when
traveling at road speeds.
9. Do not operate an implement
while the tractor is on the road.
Lock the three point hitch in the
raised position.
10. When towing other equipment,
use a safety chain and place an
SMV emblem on it as well.
1. Disengage the P.T.O, lower all
implements, place all control le-
vers in the neutral position, set
the parking brake, stop the engine
and remove the key.
PARKING THE TRACTOR
621O119a
OPERATING THE P.T.O
(1) P.T.O Shaft Cover
1. Make sure the tractor is complete-
ly stopped, gears are in neutral
and all moving components have
completely stopped before con-
necting, disconnecting, adjusting,
cleaning or servicing any P.T.O
driven equipment.
2. Keep the P.T.O shaft cover in
place at all times. Replace the
P.T.O shaft cap when the shaft is
not in use.
621O120a
To Next Page
Loading...
