CHANGING TRANSMISSION
FLUID
(1) Level Gauge (2) Oil Filling Plug
(A) Oil level is Acceptable Within this Range.
621Oa13a
(1) Drain Plugs
621Oa14a
1. To drain the used oil, remove the
drain plugs at the bottom of the
transmission case and differen-
tials. Drain the oil completely into
a drain pan.
2. After draining reinstall the drain
plug.
3. Fill with the new KIOTI UTF55 u-
id to the upper line of the gauge.
(See "LUBRICANTS" in Mainte-
nance Section)
IMPORTANT
-
-
-
CAUTION
-
4. After running the engine for a few
minutes, stop it and check the oil
level again; add oil to prescribed
level.
L3503 28 L (7.40 U.S.gal.)
LK45 26 L (6.87 U.S.gal.)