Hydraulic block type outlet is use-
ful when adding hydraulic operated
equipment such as : front end loader,
front blade, etc.
WITH AN ATTACHMENT MOUNTED
1. Remove the pulg.
2. Connect the hoses to both the in
-
let and outlet (PT3/8") of an at-
tachment as shown in the gure.
3. When mounting an attachment,
completely turn the adjusting
screw conutercolckwise(C).
POWER EXTRACTION OF THE
HYDRAULIC BLOCK
IMPORTANT
When the implement is not in
use, turn the directional valve
clock-wise(O) completely. If
not, the relief valve will operate.
621O707A
To Next Page
Loading...
