5
-40
L3503 / LK45
Weight should be added to the rear
wheels only if it is needed to improve
traction or stability. The amount of
weight should directly correspond
to the job at hand and should be re-
moved when not needed.
The weight should be added to the
tractor in the form of liquid ballast,
rear wheel weights or both.
REAR WHEEL WEIGHTS
The rear wheel weights can be at-
tached to the rear wheel. See your
implement owner's manual for the
proper amount of weight or consult
your local KIOTI dealer.
FRONT END WEIGHTS
Front end weights can be attached to
the front of the tractors bumper. You
should consult your implement own-
er's manual for the required amount
of weight or contact your local KIOTI
dealer for a recommendation.
REAR BALLAST
BALLAST (OPTION)
FRONT BALLAST
(1) Front End Weights
(2) Rear Wheel Weights
621O802A
CAUTION
To avoid personal injury:
Additional ballast will be need-
ed for transporting heavy im-
plements. When the implement
is raised, drive slowly over
rough ground, regardless of
how much ballast is used.
Do not ll the front wheel with
liquid to maintain steering con-
trol.
IMPORTANT
Never overload the tires.
Do not add more weight than
is necessary, or is indicated in
chart.
Maximum weight
17 kg
×
6 Pieces
(150 lbs.)
IMPORTANT
Do not overload tires.
Add no more weight than indi-
cated in chart.
Maximum weight
per wheel
25 kg
×
6 Pieces
(331 lbs.)
To Next Page
Loading...
