EVERY 50 HOURS
LUBRICATING GREASE FITTINGS
You should apply a small amount of
multi-purpose grease to the following
points every 50 hours or as needed.
If your tractor is operated in extreme-
ly wet, muddy, or dusty conditions
you should lubricate the ttings more
often.
(1) Grease Fittings (Top Link Holder)
(2) Grease Fitting (Brake Pedal,Clutch Pedal)
621Oa17a
Check wheel bolts and nuts regular-
ly especially when new. If they are
loose, tighten them as follows.
CHECKING WHEEL BOLT
TORQUE
(1) 176 N·m (18 kgf·m, 130 lbf·ft)
(2) 284.4 N·m (29 kgf·m, 290.7 lbf·ft)
621Oa18a
CAUTION
-
-
To Next Page
Loading...
