Kioti LK45 - Inflation Pressure; Tires

5
-38
L3503 / LK45
Model Tire sizes Ination Pressure
L3503
Front 8-16 (4PR) / 9.5-16 (6PR)
157kPa (1.6kgf/cm
2
, 22psi)
[196kPa (2.0kgf/cm
2
, 28psi]
Rear 13.6-24 (6PR) / 13.6-26 (6PR) 157kPa (1.6kgf/cm
2
, 22psi)
LK45
Front 8-16 (4PR) / 9.5-16 (6PR)
157kPa (1.6kgf/cm
2
, 22psi)
[196kPa (2.0kgf/cm
2
, 28psi]
Rear 13.6-24 (6PR) / 13.6-26 (6PR) 157kPa (1.6kgf/cm
2
, 22psi)
TIRES
Though the tire pressure is factory-set to the prescribed level, it naturally drops
slowly in the course of time. Thus, check it everyday and inate as necessary.
INFLATION PRESSURE
* IND… for Industrial
[ ] ... equipped front load
WARNING
To avoid personal injury:

Do not attempt to mount a tire.
This should be done by a qual-
ified person with the proper
equipment.

Always maintain the correct
tire pressure.
Do not inflate tires above the
recommended pressure shown
in the operator’s manual.
IMPORTANT

Do not use tires larger than
specied.

When you intend to mount
different size of tires from
equipped ones, consult your
dealer about front drive gear ra-
tio for details.
Excessive wear of tires may oc-
cur due to improper gear ratio.
NOTE

Maintain the maximum pressure in front tires, if using a front loader or
when equipped with a full load of front weights.
L3503_LK45-호주향-05.indd 38 2008-12-18 오후 1:52:59