Service ManualService Manual
Operating Lights marLEDOperating Lights marLED
®®
E9 / E9i / E9 / E9i / E15E15
8686 VV 1 01 0
e) Checking the e) Checking the brake setscrewsbrake setscrews
•• Check the brake setscrews for correct adjustment in the tracking and light arms.Check the brake setscrews for correct adjustment in the tracking and light arms.
••
If necessary, tighten the screws to such an extent that the arms and the light heads can beIf necessary, tighten the screws to such an extent that the arms and the light heads can be
easily manipulated without moving of their own accord.easily manipulated without moving of their own accord.
••
√√
Fig. Fig. 10-12 10-12 Brake Brake setscrew setscrew positions positions in in a a typical typical arm arm systemsystem
f) Checking the spring arm settingf) Checking the spring arm setting
••
Check the spring tension and height stop of the spring arm(s) for correct setting.Check the spring tension and height stop of the spring arm(s) for correct setting.
••
√√
g) Checking the rating plate (ID label) g) Checking the rating plate (ID label) and warning labelsand warning labels
•• Check the ID label(s) for presence and legibility.Check the ID label(s) for presence and legibility.
•• For lights with pilot laser, check the warning labels for presence and legibility.For lights with pilot laser, check the warning labels for presence and legibility.
••
√√
To Next Page
Loading...
