KMC Controls SimplyVAV BAC-8001 User Manual

C o n t e n t s
Contents 3
Section 1: About the controllers 5
Specifications 6
Accessories and replacement parts 9
Available models 10
Safety considerations 10
Section 2: Installing the controllers 13
Setting the rotation limits 13
Mounting on a VAV terminal box 14
Connecting an airflow sensor 15
Connecting inputs and outputs 15
Connecting room temperature sensors 15
Connecting a DAT sensor 16
Connecting power 17
Maintenance 18
Section 3: Changing the room setpoint 19
Section 4: Configuring the controllers 21
Getting started with configuration 21
Entering system temperature setpoints and limits 23
Configuring the VAV Box options 27
Set the airflow setpoints 29
Advanced options 33
Restore Application 35
Section 5: Balancing airflow 37
Section 6: Application drawings 41
Cooling or heating without reheat 42
Staged reheat 43
Modulating reheat 44
Time proportional reheat 45
Floating reheat 46
Dual-duct application 47
Section 7: Sequences of operation 49
Input sources 49
Occupancy sequence 50
Automatic occupancy 50
Occupied 50
Unoccupied 51
Standby 51
Space setpoints 51
Types of setpoints 51
Setpoint limits 52
PID control loops 52
Airflow setpoints sequence 53
Changeover 53
Discharge Air Temperature (DAT) limiting 53
SimplyVAV Contents
Revision H 3

KMC Controls SimplyVAV BAC-8001 Specifications

General

Brand	KMC Controls
Model	SimplyVAV BAC-8001
Category	Controller
Language	English