KMC Controls SimplyVAV BAC-8001 User Manual

Section 6: Application drawi ngs
This section covers the drawings, materials, and instructions for specific VAV
applications.
Each SimplyVAV model is designed for a specific set of applications. The following topics
are for control technicians and engineers that will plan for and install controllers for
SimplyVAV applications.
Submittal sheets for all of these applications are available from the BAC-8000 series page at
KMCControls.com.
Application drawings in this section
Cooling or heating without reheat 42
Staged reheat 43
Modulating reheat 44
Time proportional reheat 45
Floating reheat 46
Dual-duct application 47
SimplyVAV
Revision H 41

KMC Controls SimplyVAV BAC-8001 Specifications

General

Brand	KMC Controls
Model	SimplyVAV BAC-8001
Category	Controller
Language	English