KMC Controls SimplyVAV BAC-8001

Procedure Detailed steps Sensor display
5 Enter the baud
1.
Press the or buttons to select a new baud.
2.
Press the
Set
Point
button is save the selected baud.
The display returns to COMM.
BAUD
384OO
6 Advance or exit
1.
Press the or buttons to select one of the
following:
l BLNC or CNFG options
l EXIT to return to the temperature display.
2.
Press the
Set
Point
button to select the next function.
COMM
Procedure to set up network communications (continued)
Section 8: System integration and networking KMC Controls, Inc.
66 Revision H