KMT STREAMLINE S50 User Manual

Section 1
Introduction
20479258
2-2012/Rev 02
1-7
1.5 Worldwide Product Support
The KMT Waterjet Customer Service Department is available to answer your questions regarding
equipment installation and service. Technical assistance is available by phone and on-site support
is available on request.
On-site technical assistance is available during equipment installation and startup. Additionally,
technical support for service and maintenance issues and training of operators and maintenance
personnel is available. Periodic training sessions are also conducted at KMT Waterjet and
customer facilities.
Contact the KMT Waterjet Customer Service Department for additional information.
USA
Customer Service Department
Europe
Technical Manager
KMT Waterjet Systems
PO Box 231
635 West 12th Street
Baxter Springs, KS 66713
USA
Phone: (800) 826-9274
Fax: (620) 856-2242
Email: wj.service@kmtwaterjet.com
Email: wj.parts@kmtwaterjet.com
KMT Waterjet Systems GmbH
Wasserstrahl-Schneidetechnik
Auf der Laukert 11
D-61231 Bad Nauheim
Germany
Phone: +49-6032-997-117
Fax: +49-6032-997-270
Email: order.service@kmt-waterjet.com
1.6 Spare Parts
KMT Waterjet maintains a well-stocked Spare Parts Department, staffed by trained,
knowledgeable personnel. If required, emergency shipment is available. Contact the Customer
Service Department to order spare parts, or for additional information.
1.7 Manual Organization
This manual contains operating and maintenance procedures for the Streamline S50. Information
is organized as follows:
NOTE
The procedures, guidelines and parts list included in this document pertain only to
the factory installed components from KMT Waterjet Systems. Modifications or
additions made by the system builder are not addressed.
 Section 1, Introduction, provides equipment features and options, a brief operational
overview, details regarding safety issues and contact information for product support.
 Section 2, Installation, details installation requirements and procedures. Systematic
guidelines for commissioning the intensifier are also provided.
 Section 3, Maintenance, highlights routine and preventive maintenance requirements.
Precautions associated with high pressure cutting equipment are also reviewed.

KMT STREAMLINE S50 Specifications

General

Brand	KMT
Model	STREAMLINE S50
Category	Cutter
Language	English