KONE UniDrive
TM
service manual vs 9 25
Signal one-way
traffic (Text).
This output will be active when One Way traffic is selected,
and OUTSIDE is activated, to indicate that the user is not able
to use the door in this direction.
Signal one-way
traffic. (lamp)
This output will be active during 500 m sec, when One Way
traffic is selected, and OUTSIDE is activated, to indicate that
the user is not able to use the door in this direction. After 5
seconds delay, this output will be reactivated for an other 500m
sec when Outside is activated (again).
.
Signal Sequential
opening (Text)
When the UniDrive
TM
Sequential opening is selected, and an
incoming Sequential opening signal prevents the door from
reacting on a incoming open-command, this output will be
switched on, to indicate that the user should wait, until the
incoming Sequential opening signal is switched off.
Signal Sequential
opening (lamp)
When the UniDrive
TM
Sequential opening is selected, and an
incoming Sequential opening signal prevents the door from
reacting on a incoming open-command, this output will be
activated during 500 m sec, to indicate that the user should
wait, until the incoming Sequential opening signal is switched
off. After 5 seconds delay, and a active input, this action will be
repeated.
Signal Safety
Sensor Open
The output will be activated, when an input programmed at
Safety Sensor Stop or Slow is activated.
Indication
“toilet occupied”
(from version 1.12)
Active during toilet use. See input: toilet functions
To Next Page
Loading...
Need help?
General