Konica Minolta bizhub 501 Service Manual

bizhub 501/421/361
5. FIRMWARE VERSION UP
103
Field Service Ver.2.0 Mar. 2009
5.2.3 USB ISW in the service mode
This mode is used when the OACB operates properly.
Note
• To execute the ISW, be sure to turn ON the Main power switch (SW1) of the main body and the
Sub-power switch (SW2). If the power were turned ON after the connection had done while the
power OFF, USB Memory may not be recognized.
A. Checking the firmware version
Before rewriting firmware, be sure to check the current firmware version following the procedure given below.
Step Operation
1 Enter the Service mode.
2 Press the [Firmware Version] in "Service mode screen".
3 Indication of "Firmware Version screen"

Konica Minolta bizhub 501 Specifications

General

Type	All-in-One Printer
Functions	Print, Copy, Scan, Fax
Print Speed (Black)	50 ppm
Print Resolution	1200 x 1200 dpi
Max Resolution (B&W)	1200 x 1200 dpi
Scan Resolution	600 x 600 dpi
Copy Speed (Black)	50 cpm
Copy Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Paper Capacity	1, 150 sheets
Max Paper Capacity	5, 650 sheets
Automatic Duplexing	Yes
Duplex Printing	Yes
Connectivity	USB, Ethernet
Network Connectivity	Yes
Operating System Compatibility	Windows, Mac, Linux
Maximum Paper Size	11 x 17 inches