3. PERIODIC CHECK
60
Field Service Ver.2.0 Mar. 2009
bizhub 501/421/361
3.11.4 Replacing the separation roller assy (tray 2)
A. Periodically replaced part/cycle
• Separation roller assy : Every 750,000 prints (Actual replacement cycle: Every 300,000 prints) *1
: Every 675,000 prints (Actual replacement cycle: Every 300,000 prints) *2
*1 501/421
*2 361
B. Procedure
1.
Remove the bypass unit.
(See P.62)
2.
Pull out the tray 2.
3.
Remove the vertical conveyance door.
(See P.53)
4.
Remove the conveyance roller cover.
(See P.53)
5.
Remove the paper feed guide /2.
(See P.53)
6.
Remove the paper feed unit /2.
(See P.53)
7.
Remove the separation roller unit /2.
(See P.53)
8.
Remove the 2 screws [1] and then remove the
separation roller mounting plate assy [2].
Note
• When installing the separation roller mount-
ing plate assy, be sure to fasten it with screws
while pressing it in the arrow-marked direc-
tion [3].
[1][2][1]
[3]
50gaf2c133na
To Next Page
Loading...
General
