2. PRODUCT SPECIFICATIONS
6
Field Service Ver.2.0 Mar. 2009
bizhub 501/421/361
1
*1 When EK-703 is optionally installed.
*2 1 port when MK-708 and FK-502 are optionally installed.
2 ports when MK-708, ML-503 and FK-502 x 2 are optionally installed.
C. Type of paper
*1 Standard specified paper
Plain paper: Inch: Hammermill Tidal MP (20 lbs)
Metric: Konica Minolta Profi (80 g/m
2
)
Recycle paper: Inch: Hammmermill Bond (20lbs), Domtar Recycled Copy (20lbs)
Metric: Nautilus (80 g/m
2
)
*2 Special paper/recommended paper
Thick paper: Inch: Cougar Cover 65 lb
Metric: Xerox colotech 200 g/m
2
Thin paper: Inch: Boise Cascade Bond 16 lbs
Label paper: Inch: AVERY 5352
Metric: AVERY DPS 24
OHP film: Inch: 3M CG3700
Metric: Folex overhead X-500, 3M CG3700
Envelope: Inch: Preservation Wove (24 lbs) #6-3/4, #9, #10 (4-1/8 x 9-1/2)
Metric: Schneider Soehne Distinction 100 (100 g/m
2
) #lang
Schneider Soehne Briefumschlage (100 g/m
2
) #C5
Schneider Soehne Velin 80White (80g/m
2
) #C6
*3 Label paper is loaded and fed one sheet at a time.
D. Maintenance
Resolution Scan 600 x 600 dpi
Write 600 x 600 dpi
Image memory 205 MB
Interface section RJ45 Ethernet, Serial port (RS232-C), Serial port (USB TypeA x 3),
Serial port (USB TypeB) *1, RJ-11 *2
Plain paper *1 All trays High quality paper of 60 to 105 g/m
2
Special paper *2 Bypass feed only OHP film, label paper *3, blueprint master paper *3
High quality paper of 50 to 59 g/m
2
(thin paper)
All trays High quality paper of 91 to 105 g/m
2
(thick paper)
Bypass feed only High quality paper of 106 to 210 g/m
2
(thick paper)
Maintenance Every 250,000 prints (bizhub 501/421)
Every 225,000 prints (bizhub 361)
To Next Page
Loading...
General
