5. FIRMWARE VERSION UP
122
Field Service Ver.2.0 Mar. 2009
bizhub 501/421/361
5.4 Internet ISW Setting
• By using this setting, the Firmware stored in the Server can be downloaded over internet for upgrading.
5.4.1 Internet ISW Set
5.4.2 HTTP Setting
• It will be displayed only when [Internet ISW Set] is set to "ON".
A. Data Input Setting
B. Connect Proxy
Functions • To set whether or not to enable each setting for Internet ISW.
Use • To use when upgrading the Firmware by Internet ISW.
• Each setting such as Server setting will be valid by setting this to "ON".
Note
• When the following setting is set to "ON", this setting will automatically be
set to "OFF" and cannot be changed.
[Administrator Setting] → [Security Setting] → [Enhanced Security Mode]
Setting/
Procedure
• The default setting is "OFF".
ON "OFF"
Functions • To set whether or not to enable downloading using the HTTP Protocol.
Use • To use when accessing the Server using the HTTP Protocol.
• Setting on the Proxy Server will be valid when this setting is "ON".
Setting/
Procedure
• The default setting is "OFF".
ON "OFF"
Functions • To set whether or not to connect via Proxy Server when accessing the Server.
Use • To use when accessing the Server via Proxy Server.
Setting/
Procedure
• The default setting is "OFF".
ON "OFF"
To Next Page
Loading...
General
