Konica Minolta IC-601 - Page 71

IC-601 6-8
6.2 Transmission to an E-mail Address
6
is displayed. You can also release the address by pressing [Address] to return to the Select Ad-
dresses screen and then pressing [Clear All] or [Reset] on the Control Panel.
When an E-Mail Address is Input Manually
1 Follow the Step 1 to 6 of "When an E-Mail Address is Already Registered" (p. 6-4).
2 Press [Input Address].
% If you want to select the registered address, refer to page 6-4.
3 Press [Address] to input an address and press [OK].
% Pressing [Address] displays the character input screen.
% For more information on how to input characters, refer to page 3-6.
% Press [Register] to register the inputted address.