Konica Minolta IC-601 - Sending Using Web Service (WS Scan); Settings Required to Use the Web Service

IC-601 4-11
4.8 Sending Using Web Service (WS Scan)
4
4.8 Sending Using Web Service (WS Scan)
By instructing a scan operation using the Web service function from a computer (Windows Vista/7/Server
2008/8/Server 2012) on the network, the scanned data can be sent to the computer.
d Reference
Refer to page 6-32 for more information about method to instruct a scan operation from a computer.
The following explains the presetting required for the computer.
4.8.1 Settings required to use the Web service
The following settings are required to use the Web service.
- Installing the driver program of this machine to a computer
- Configuring settings to use the Web service on this machine
d Reference
The Web service settings on this machine are configured in Administrator Settings. For details, refer to "Us-
er's Guide (POD Administrator's Reference)".
Check before installation
Before installing the driver program, make sure [Network discovery] is turned on in [Control Panel] - [Network
and Sharing Center].
Original
WS Scan
Local area network