IC-601 5-18
5.6 Registering a Group
5
5.6 Registering a Group
If you want to send the scanned data to multiple addresses/storage locations, you can register them as a
Group. The registration is done in the following steps.
0 At maximum, 100 groups can be registered.
0 At maximum, 50 addresses can be registered for each group.
0 Multiple E-mail addresses can be registered. One setting can be registered for each of HDD, FTP, and
SMB.
1 Press [SCAN] tab.
2 Press [Group].
% In the initial settings, the Select Addresses screen (E-mail) is displayed. The default destination tab
of the scan screen can be set at [Utility/Counter] - [User Setting] - [Scan Setting]. For details, refer
to page 7-6.
% If the Group is already registered, the Name is displayed.
3 Press [Register/Edit].
4 Press [Add].
To Next Page
Loading...
