IC-601 5-4
5.2 Registering an E-mail Address
5
5.2 Registering an E-mail Address
When using the function to send the scanned data as an E-mail attached file, you can register the E-mail ad-
dress in advance. The registration is done in the following steps.
0 Refer to page 3-8 for the method of registering the address searched with the LDAP search function.
0 For E-mail, addresses can be registered as many as 450 in sum.
1 Press [SCAN] tab.
The Select Addresses screen appears.
2 Make sure that [E-mail] is selected.
% In the initial settings, the Select Addresses screen (E-mail) is displayed. The default destination tab
of the scan screen can be set at [Utility/Counter] - [User Setting] - [Scan Setting]. For details, refer
to page 7-6.
% If the E-mail address is already registered, the Name is displayed.
% In the initial settings, such index keys as [A-C] and [D-F] are displayed.
3 Press [Register/Edit].
4 Press [Add].
5 Configure the necessary items on the Add Address screen. Pressing an each item displays the char-
acter input screen.
% For more information on how to input characters, refer to page 3-6.
To Next Page
Loading...
