Konica Minolta IC-601 - Registering a User Box as Destination (SCAN Screen)

IC-601 5-10
5.3 Registering a User Box
5
5.3.2 Registering a User Box as Destination (SCAN Screen)
You can register a user box that was created in [MACHINE] - [Controller] as a destination in the SCAN screen.
7 CAUTION
- The [guest] box is disabled when IC-601 is equipped.
d Reference
Refer to page 5-6 for more information about method to create the user box.
0 You can register up to 150 user boxes as destinations.
1 Press [SCAN] tab.
2 Press [HDD].
% In the initial settings, the Select Addresses screen (E-mail) is displayed. The default destination tab
of the scan screen can be set at [Utility/Counter] - [User Setting] - [Scan Setting]. For details, refer
to page 7-6.
% If the user box is already registered, the Name is displayed.
% In the initial settings, such index keys as [A-C] and [D-F] are displayed.
3 Press [Register/Edit].
4 Press [Add].