IC-601 6-22
6.5 Transmission to the SMB server
6
When an SMB server is Input Manually
1 Follow the Step 1 to 2 of "When an SMB server is Already Registered" (p. 6-20).
2 Press [Input Address].
% If you want to select the registered address, refer to page 6-20.
The Address Manual Input screen appears.
3 Press [Register Name] to enter the Name.
% The Name is automatically inputted in [Reference Name]. If you want to change the Name, press
[Reference Name] and input the Name again.
% For more information on how to input characters, refer to page 3-6.
To Next Page
Loading...
