Using the Utility Mode
7
Konica 7115/7118 7-25
Total Counter Clear for All Accounts Procedure (A-6)
1
Call the Administrator Mode to the Display.
❍
Calling the Administrator Mode to the Display (p.7-16)
2
Making sure that “Ad-” appears on the Display, enter “1”
on the KEYPAD.
3
Press the [START] key.
4
Making sure that “A--” appears on the Display, enter “6”
on the KEYPAD.
5
Press the [START] key.
6
Check that the Display shows “Clr.”
7
Press the [START] key.
This clears the Total Counter values of all accounts, resetting them to “0.”
Konica7115_7118.book Page 25 Friday, October 19, 2001 12:02 PM
To Next Page
Loading...
