5
Making Copies
5-4 Konica 7115/7118
Manual Paper Selection
1
Position the original.
❍
Original Loading. (p.4-1)
2
Press the [SIZE] key on the control panel until the desired
paper size indicator lights.
3
Make the other necessary settings.
❍
Zoom Ratio (p.5-11)
❍
Image Density (p.5-16)
4
Enter the number of copies to be made on the KEYPAD and press the [START] key.
✎
Tip
The Display shows different marks according to the type of paper set by selecting User’s
Choice. Details:
If plain paper is set in User’s Choice, the “
1
” mark will not be displayed even if cards or
postcards, or OHP transparencies, are loaded in the tray.
Cards and postcards
OHP transparencies
Plain paper
Konica7115_7118.book Page 4 Friday, October 19, 2001 12:02 PM
To Next Page
Loading...
