Making Copies
5
Konica 7115/7118 5-7
5
Make any other necessary settings.
❍
Zoom Ratio (p.5-11)
❍
Image Density (p.5-16)
6
Press the [START] key.
✎
Tip
If the same settings apply to the second and subsequent sheets of paper, you have only to
load the paper in the Bypass Tray. This will automatically start the new copy cycle.
✎
Tip
To make copies continuously on cards, OHP transparencies, or postcards, load the paper
in the 1st Tray. Refer to “Copy Paper”(p.3-22) and “Adding Paper” (p.8-4).
Konica7115_7118.book Page 7 Friday, October 19, 2001 12:02 PM
To Next Page
Loading...
