Making Copies
5
Konica 7115/7118 5-19
3
Make any other necessary settings.
❍
Paper (p.5-3)
❍
Zoom Ratio (p.5-11)
❍
Image Density (p.5-16)
4
Enter the number of copies to be made on the KEYPAD and then press the [START] key.
This will start the interrupt copy cycle.
5
After the interrupt copy has been made, press the [INTERRUPT] key:
The Interrupt indicator will go out and the settings will be recovered for the interrupted copy
job.
6
Reposition the original for the interrupted copy job that has been removed in step 2.
7
Press the [START] key.
The interrupted copy job will be resumed.
Konica7115_7118.book Page 19 Friday, October 19, 2001 12:02 PM
To Next Page
Loading...
