6
Advanced Copying
6-12 Konica 7115/7118
Setting the Margin Erase Function
1
Position the original.
❍
Original Loading (p.4-1)
2
Press the [MARGIN ERASE] key to light the desired
erase position indicator.
?
Do you know how to set the erase width for each
erase function?
➜
The Left, Upper, and Frame erase width can be set in
the range between 1/4 and 3/4, in 1-mm (1/16) incre-
ments. The default value is 1/2.
➜
Only 1/2 is available for the Center erase width.
➜
To change the erase width, change the setting for
“Erase Setting” of User’s Choice. (p.7-8)
3
Make any other necessary settings.
4
Enter the number of copies to be made on the KEYPAD and then press the [START] key.
Konica7115_7118.book Page 12 Friday, October 19, 2001 12:02 PM
To Next Page
Loading...
