Konka R8A - Sending and Receiving Information

102
with.
(5) Your phone then automatically tries to pair
with the headset.
(6) If automatic pairing fails, enter the pass code
supplied with your headset.
The pairing and connection status is displayed
below the hands-free headset or car kit name in the
Bluetooth devices section. When the Bluetooth
headset or car kit is connected to your phone, the
Bluetooth connected icon is displayed in the
status bar. Depending on the type of headset or car
kit you have connected, you can then start using
the headset or car kit to listen to music and/or make
and receive phone calls.
Reconnecting a headset or car kit
When you have paired a headset with your phone,
you should be able to reconnect it automatically by
turning on Bluetooth on your phone, and then
turning on the headset.
Disconnecting or un-pairing from a
Bluetooth Device
(1) Open Settings-> Wireless &
networks->Bluetooth.
(2) Choose a device has been connected.
(3) Touch Forget.
Sending and Receiving Information
You can use Bluetooth to transfer information
between your phone and another Bluetooth-
enabled device such as a phone or notebook