What to do if my Korg iS35 has no sound?
If your Korg Musical Instrument produces no sound, check the connections to your amplifier or mixer and ensure all components of the amplifying system are powered on. Verify that the MASTER VOLUME and VOLUME sliders are not set to “0”. Also, check if the Local Control and Speaker On parameters are set to OFF; if so, turn them ON.
Why Korg iS35 power does not turn on?
If your Korg Musical Instrument isn't powering on, ensure the power cable is securely plugged into both the outlet and the back of the instrument, and that the cable is not damaged. Also, verify that the power switch is in the ON position. If these steps don't resolve the issue, it may indicate a problem with the mains.
Why my Korg iS35 Musical Instrument does not respond to MIDI messages?
If your Korg iS35 Musical Instrument isn't responding to MIDI messages, check that all MIDI cables are correctly connected. Also, ensure the external device is transmitting on MIDI channels that the iS35 is set to receive. Finally, verify that the iS35's MIDI Filters aren't blocking the reception of these messages.
What to do if selected arrangement or backing sequence does not playback on Korg Musical Instrument?
If a selected arrangement or backing sequence isn't playing back on your Korg Musical Instrument, ensure the MIDI Clock parameter is set to INT. If using an external device's MIDI Clock, set the parameter to IN1 or IN2 (depending on the connection) and confirm the external device sends MIDI Clock data.
How to fix wrong sounds on Korg iS35 Musical Instrument?
If your Korg Musical Instrument is producing incorrect sounds, check if the USER banks contain modified data. If they do, load the correct data for the song, backing sequence, or arrangement you want to play back. Also, verify if either of the two drum kits in RAM has been modified; if so, load the appropriate drum kits (27 and 28 Drum programs). Finally, check if the arrangements have been modified; if so, load the correct data.
How to stop sound that does not stop on Korg iS35?
If the sound on your Korg Musical Instrument continues without stopping, make sure that the damper switch polarity parameter is set correctly.
Why Korg iS35 Musical Instrument arrangements or backing sequences do not play the correct patterns?
If the arrangements or backing sequences on your Korg Musical Instrument aren't playing the correct patterns, check if the arrangements use the USER styles. If so, load the USER styles required by the arrangements.
Why percussive instruments played are not correct on Korg iS35 Musical Instrument?
If the percussive instruments played on your Korg iS35 Musical Instrument aren't correct, make sure the track transposition is set to +00 and that any external device connected is transmitting without transposition.
Why lowest note are not played on Korg Musical Instrument?
If the lowest notes aren't playing on your Korg iS35 Musical Instrument and a MIDI controller is connected through the Global channel (channel 1 by default) with the SPLIT button LED lit, the notes are divided. The Lower part (low notes below the split point) might be muted in some Arrangements.
General| Number of Keys | 61 |
|---|---|
| Keyboard | Velocity-sensitive |
| Multitimbral | 16 parts |
| Sound Source | PCM |
| Display | LCD |
| Outputs | L/Mono, R |
| Power Supply | AC Adapter |
| Polyphony | 32 voices |
| Sound Engine | AI2 |
| Effects | Reverb, Chorus |
| Sequencer | 16-track |
| Disk Drive | 3.5" |
| Connectors | Headphone |
| MIDI | In/Out |
To Next Page
