Reference • Backing Sequence mode
95
Recording a track at a time in
real time
This method allows you to create a backing sequence
by recording a track at a time.
The backing sequence tracks may corresponds to vari-
ous tracks of the iS35. Some of the backing sequence
tracks do not correspond to real tracks of the iS35, but
to special control tracks.
Note: The backing sequence must receive the keyboard
tracks over the Global and the chords over the Global
and/or the Chord 1 and Chord 2 channels.
Preparing the recording
1 Press B.SEQ to enter the Backing Sequence
mode.
The B.SEQ led will light up. The display shows the
backing sequence name, the measure number and
the tempo. If this information does not appear,
press EXIT/NO to go to Page 1 of the Backing
Sequence mode.
2 Move the cursor to the backing sequence name
with the CURSOR buttons, then select the back-
ing sequence you wish to record using the
TEMPO/VALUE buttons (or the DIAL).
In this example select BSQ4. (If BSQ4 is recorded,
select another backing sequence).
3 Select an arrangement with the buttons of the
ARRANGEMENT section.
Press one of the BANK [A], [B] or [USER] buttons
to select the bank. Then press two NUMBER but-
tons in a sequence to enter a two-digit number
from 11 to 88.
4 If necessary, change the split point, the Key-
board Mode, the Keyboard Assign and the
Chord Scanning.
5 Press REC/WRITE/LYRICS to enter the recording
mode.
The REC/WRITE/LYRICS will light up and the
recording page will appear. The arrangement
tracks (ATr) are selected. The display shows the sta-
tus of the backing sequence tracks (REC = record-
ing).
6 To hear the metronome during the recording,
move the cursor to “M” (metronome) and select
the option REC using the TEMPO/VALUE buttons
(or the DIAL).
7 To record the tempo changes, move the cursor
to the “Tempo” parameter and press the
TEMPO/VALUE buttons (or the DIAL) together to
select the option TEMPO-REC.
Recording the chords
The chords will play the accompaniment tracks.
Abbrev. BSQ track iS35 track
ATr Arrangement Tracks
Upper 1, Upper 2,
Lower, Drum, Percus-
sion, Bass, Acc1, Acc2,
Acc3, chords, controls
KBTr Real Time Tracks
Upper 1, Upper 2,
Lower
ETr Extra Tracks
Channels not used by
real time and accompa-
niment tracks
CHRD Chord Track
Accompaniment
(Drum, Perc, Bass,
Acc1, Acc2, Acc3)
CTRL Control Track
Accompaniment con-
trol buttons (Fill, Varia-
tion, Style selection,
Arrangement selection,
etc.)
Backing Sequence name
Measure number
Tempo
Arrangement
Real time tracks
Chord track
Controls track
Metronome
Selected track/s
Quantize value
Tempo
To Next Page
Loading...
Need help?
General
