Reference • Song Edit mode
133
Page 6: Erase song
When a song is loaded in Song Edit, the memory avail-
able for the backing sequences will reduce. This can
prevent you from reading a new backing sequence or
an SMF in format 1 in the Song Play mode. Erase the
song in memory to free up some memory. Go to this
page and press ENTER/YES twice.
If you do not want to lose the data, save it on disk
before erasing it from memory. Use the Save function
on “Page 13: Save”.
Page 7: Edit
In this page, you can select one of the three following
functions: delete measures (DELETE), insert measures
(INSERT), erase data from measure (ERASE). Move
the cursor to the desired function using the CURSOR
buttons, then press ENTER/YES to enter the subpage.
Delete measures
This function deletes measures from the selected track.
The following measures will then be moved back, fill-
ing the gap that was created by deleting the other data.
1. Move the cursor to the “Track” field using the
CURSOR buttons, and choose the track with the
TEMPO/VALUE buttons (or the DIAL). Select ALL
to delete the measures from all tracks at the same
time.
2. Move the cursor to the “First measure” field, and
choose the first of the measures you wish to delete.
Move the cursor to the “Last measure”, and choose
the last of the measures you wish to delete If you
only wish to delete one measure, assign the same
measure to both the fields.
3. Press ENTER/YES twice to confirm deletion.
Insert measures
This function inserts measures into the selected track.
The following measures will be moved forward.
1. Move the cursor to the “Track” field using the
CURSOR buttons, and choose the track with the
TEMPO/VALUE buttons (or the DIAL). Select ALL
to insert measures on all tracks at the same time.
DELETE
INSERT
ERASE
Track
First measure
Last measure
Time signature
Track
First measure
Number of measures
To Next Page
Loading...
Need help?
General
