Kortho Hot Quick Coder-D Series - Coding Unit Caution Labels

SAFETY
H215 AE Rev.: 10 kortho Hot Quick Coder-D
4-3
4.6 Coding unit caution labels
Thissectiondescribesthecautionlabelsusedonornearthecodingunit.
Fig. 4.3 Cautionlabels,generalandhotpartsrisk.
CAUTION:
Keepbodypartsawayfromthemovingpartsofthecodingunittoavoidcrushinjurieswhenthe
printerisoperational.
Thetextholderwillstamponthe
platenwithpressure,thiscansqueezebodypartswithhigh
degreeofforce.
CAUTION:
Keepbodypartsawayfromthetextholder,thefoamrollofthehotroll,theheatingringandthe
preheatunittoavoidburninjurieswhentheprinterispoweredup.
Theheatingringisheatedby
anheatingelement,whichcandeliveratemperatureupto240°C
(464°F).
WARNING:
Theheatingelementsofthecodingunitarepoweredby230Vor115V.