OPERATION
kortho Hot Quick Coder-D H215 AE Rev.: 10
6-8
6.4 User settings
Fillinthistablewiththevaluesfoundbysettingtheprinterparameters.
Usethetable,asareference,tosettheprinterparameterswhenthememoryisresettothedefaultvalues.
Keepthetablenearby,whencallingthehelpdeskofyourlocaldistributor.
Firmware: V . .
Parameter Ran
e1234
SET DELAY 0.00- 2.00s
SET TEMP 0 - 165°C
SET TIME 5.0- 50.0ms
Parameter Ran
e1234
SET DELAY 0.00- 2.00s
SET TEMP 0 - 165°C
SET TIME 5.0- 50.0ms
Parameter Ran
e
SET ALARM OFF, ±5°C, ±10°C,±15°C
EXT.BUSY 0.00- 2.50s
READY TEMP OFF, -0°C to -8°C
POWER ON STOP, RUN
PRESET
GLOBAL
Fig. 6.16 Printerparameters.
Fillinthistableandkeepnearby,whencallingthehelpdeskofyourlocaldistributor.
Manufacterer host machine, type
Control box, serial number
Coding unit , serial number
Production plant
Production line
Type of substrate (product)
Production / print rate Cycles / min
Ambient temperature (min, max) °C (min) / °C (max)
Fig. 6.17 Printerenvironmentinformation.
To Next Page
Loading...
