Kortho Hot Quick Coder-D Series - Error 016; LCD Screen is Not Lit

TROUBLESHOOTING
H215 AE Rev.: 10 kortho Hot Quick Coder-D
7-3
7.5 Error 016
Fig. 7.7 ERROR016.
Theprinttemperaturealgorithmdoesnotdetectatemperaturechangewhiletheheatingelementis
switchedon.
PerhapstheheatingelementorPT1000sensorarenotconnectedordefect,thefusesF1/F2areblownor
theheatingcircuitisdefect.
Theactualdetectedprinttemperatureisdisplayed,
hererepresentedas###°C.
7.6 LCD screen is not lit
CheckthefusesF1,F2,F3andF4.SeeInstallationchapter.
ERROR 016 ###…C