OPERATION
kortho Hot Quick Coder-D H215 AE Rev.: 10
6-6
6.3.7 Set alarm
ThisparameterisonlyaccessiblefromtheSETLCDCONTRASTmenu.
Fig. 6.12 SETALARMparameter.
TheSETALARMparameteristhedesiredtemperaturealarmsetting.Thetemperaturealarmhasfour
possiblesettings;:OFF,±5°C,±10°Cor±15°C.Thecurrentparametervalueisrepresentedby*****.
Thetemperaturerange
(±5°C,±10°Cor±15°C)isrelatedtotheSETTEMPparameter.Iftheactual
temperatureisoutsidethecurrenttemperaturerange;thealarmisset,theprinterstopsprintingandanerror
message(ERROR004)isdisplayed.
Pressbutton:
UPARROW tobrowseupwardsthroughthesettings.
DOWNARROW tobrowsedownwardsthroughthesettings.
LEFTARROW toshifttotheSETLCDCONTRASTmenu.
RIGHTARROW toshifttotheEXT.BUSYparameter.
STOP toreturntotheSTOPMODEMENUandstopprinting.
6.3.8 Extended busy (optional)
ThisparameterisonlyaccessiblefromtheSETALARMparameter.
Fig. 6.13 EXT.BUSYparameter.
TheEXT.BUSYparameterextendsthebusysignal,referto AppendixDConnections,I/Osignals.The
extendedbusytimehasarangefrom0.00to2.50seconds.Thecurrentparametervalueisrepresentedby
#.##s.
Pressbutton:
UPARROW toincreasetheparametervalue.
DOWNARROW todecreasetheparametervalue.
LEFTARROW toshifttotheSETALARMparameter.
RIGHTARROW toshifttotheREADYTEMPparameter.
STOP toreturntotheSTOPMODEMENUandstopprinting.
6.3.9 Ready temperature
ThisparameterisonlyaccessiblefromtheEXT.BUSYparameter.
Fig. 6.14 READYTEMPparameter.
TheREADYTEMPparametercontrolsthebusysignalwhenthecontrolboxispoweredon.Thisparameter
isrelatedtotheSETTEMPparameter,seesubsection 6.3.3,andhastenpossiblesettings;OFF,-0°Cand-1°C
to-8°Cinonedegreesteps.Thecurrentparametervalueisrepresentedby****.
:
*****
.
:
.
s
:
****