H215 AE
Rev.: 10 kortho Hot Quick Coder-D
9-1
9 DISMANTLING & DISPOSAL
9.1 Dismantling
Separatetheprinterpartsinthisorder:
1. Switchofftheprinter.
2. Unplugthemainspowercable.
3. Disconnectallremainingconnectionsofthecontrolbox.
4. Dismountthesupports.
5. Separatethesupportsfromthecodingunitandthecontrolbox.
6. Treatthecontrolboxaselectronicwaste.
9.2 Disposal
9.2.1 Disposal method
Thedisposalmethodmustbeinaccordancewithnationalandlocalregulationsatthetimeofthedisposal.
Theuserisresponsibleforthedisposalof:
1. Theprinterattheendofitsoperationallife.
2. Packaging
3. Usedandwastedhotrolls.
9.2.2 Waste separation
Pleasedeliverthepackagingmaterialstowasterecyclingcompanies.
Thehotrollsaregenerallybeingcountasspecialwaste.
PrintedcircuitboardsareRoHScompliantandcountaselectronicwaste.
Theremainingwasteoftheprintercontainsmainlyplastics,anodizedaluminiumandstainlesssteel
Pleasedelivertheremainingwastematerialsalsoto
wasterecyclingcompanies.
To Next Page
Loading...