Kortho Hot Quick Coder-D Series - Preface; Conventions in this manual; Instruction format

H215 AE Rev.: 10 kortho Hot Quick Coder-D
iii
 Preface
WelcometotheHotQuickCoder‐Dmanual.
Readthemanualbeforeyoustartandreaditcarefully.Thiswillavoidunnecessaryproblemsandlossof
performance.
ThismanualismeantforallpersonnelwhoareinvolvedwiththeHotQuickCoder‐D.Thepurposeofthis
manualistoget
familiarwiththecodingunitandcontrolboxoftheprinter.
Keepthismanualonasensibleandsafeplaceforfutureuse.
ContactKorthofahBVoryourlocaldistributorifyouhaveanyquestions

Conventionsinthismanual:
 TheKorthoHotQuickCoder‐Dsystemwillbereferred
toastheprinter.
 Anymaterialtheprinterisusedtoprintoniscalledsubstrate.
 TheKorthoHotroll,afoamrollwhichholdstheink(wax‐based).
 Followtheinstructionorderasindicatedwhenyoucarryoutanyoftheproceduresdescribed.

Instructionformat:
1. Instruction.
Comment(s).
a. Sub‐instruction.Comment(s).
b. Sub‐instruction.Comment(s).
2. Instruction.Comment(s).