22
Operating Instructions 10/2020 2010045v10
6.8.10 Charging point not available
The availability can be determined by the backend
depending on the configuration. If the charging
station is not connected to a backend, the charging
points are always available in an error-free state.
6.8.11 Error
If an error occurs at this charging point, the "Not
available" view is displayed with error information.
Each error is pending for at least 10 seconds. An
error is only automatically reset if an existing
connection with the vehicle is disconnected. If the
error could be acknowledged automatically, this
charging point can be used again. After
acknowledgement, it automatically changes to its
ready-to-operate state "plug in charging cable".
Fig. 20: Charging point not available using the
"CCS" DC charging outlet as an example
Fig 21: Charging point not available with error
To Next Page
Loading...