Kramer 5035

5-44 BA 348-01 * 2.0 * 34801b520.fm
5 Maintenance
Functional check ( ) :
• Parking brake
●
● ●●●
• Steering system synchronous position of wheels
●
● ●●●
• Electrical system – lights, indicator lights, signalling system,
washer system (option)
●
● ●●●
• Drive interlock (option)
●
● ●●●
• Operator seat, seat belt
●
● ●●●
• Operator presence switch (option)
●
● ●●●
• Locks: door, side windows, engine cover
●
● ●●●
• Lock: control lever (loader unit), 3rd control circuit lever
●
● ●●●
• Quickhitch lock
●
● ●●●
• Load stabilizer
●
● ●●●
• Front and rear additional control circuit (option)
●
● ●●●
• Trailer couplings
1
(option)
●
● ●●●
Leakage check ( ):
Check for tightness, leaks and chafing: pipes, flexible lines and threaded fittings. Have them rectified if necessary.
• Air intake line (air filter – diesel engine)
●
● ●●●
• Engine lubrication (diesel engine – filter)
●
● ●●●
• Fuel lines
11
fuel tank
●
● ●●●
• Cooling system (diesel engine – hydraulic oil)
●
● ●●●
• Steering system (flexible lines and rams)
●
● ●●●
• Hydraulic system (flexible lines
12
and rams)
●
● ●●●
• Quick couplers, additional control circuits, 3rd control circuit
●
● ●●●
• Drive – variable displacement pump, wheel motors, flexible
lines
12
and changeover valves
●
● ●●●
1. Have repair work performed by an authorized service centre only
2. Have maintenance only performed by an authorized service centre (acknowledgement of warranty claims)
3. Replace filter insert as indicated by the indicator light on the air filter housing, however at least every 12 months or 1500 o/h.
4. When working in an acidic environment, replace the filter every 300 operating hours!
5. When using biodegradable oil: drain the condensation water in the hydraulic oil reservoir every 500 o/h, in any case before the cold season.
6. Depending on operation and dust conditions, it may be necessary to replace the fine-dust filter more frequently
7. Replace the engine coolant every other year!
8. Depending on operation and dust conditions, it can be necessary to clean the radiator more frequently.
9. Lubricate attachment according to manufacturer’s instructions!
10. Lubricate more frequently when in heavy-duty operation (once a day)
11. Replace flexible fuel leak oil lines every 2 years
12. Replace flexible lines every 6 years (UVV, DIN 20066 part 5)
Work description
1
Service
centre
User/operator
Service centre
Delivery
inspection
Maintenance
(once a day)
Every 50 o/h
“A”
1st Inspection
at 100 o/h
2
“B” every
500 o/h
2
“C” every
1500 o/h
once a year