12 VS-42UHD - Connecting the VS-42UHD
Figure 6: Internet Protocol Properties Window
7. Click OK.
8. Click Close.
4.2.2 Connecting the Ethernet Port via a Network Hub or Switch
You can connect the Ethernet port of the VS-42UHD to the Ethernet port on a
network hub or using a straight-through cable with RJ-45 connectors.
4.3 Connecting the Remote Contact-Closure Switches
You can connect up to four remote, contact-closure switches per output to control
the VS-42UHD remotely. These switches replicate the Input selection buttons on
the front panel of the VS-42UHD.
To Next Page
Loading...
