Kramer VS-42UHD

VS-42UHD - Operating the VS-42UHD Remotely via the Web Pages 25
Item
Description
Input Button Number
Identifies the Input number
Input Type and Signal Indicator
Indicates the type of input and whether there is a signal
present on the Input
HDCP Selection Button
Click the button to turn HDCP support for the Input on
and off
HDCP Content Indicator
Indicates whether or not the Input signal is HDCP
protected
Remote Device Control Button Click the button to display the control window for the
remote device connected to this Input (see
Section 8.2.2
)
8.2.1 Switching an Input to an Output
To switch an Input to an Output, (for example, Input 2 to Output 2):
1. Click on Output button 2.
The button changes color to purple and the Output is selected.
2. Click on Input button 2.
The button changes color to purple and the output is switched.
8.2.2 Controlling a Remote Transmitter
Compatible remote transmitters, (for example, the SID-X3N, DIP-30 or DIP-31) that
are connected to the VS-42UHD can be controlled using the Web pages, (see
Section 8.2, Figure 13
).
Figure 14: The Remote Device Control Window