16 VS-42UHD - Operating the VS-42UHD 4x2 HDMI Matrix Switcher
6 Operating the VS-42UHD 4x2 HDMI Matrix
Switcher
This section describes operating the VS-42UHD and consists of:
• Switching an input to an output (see Section 6.1
)
• Acquiring an EDID from an output (see Section 6.2)
• Muting and unmuting the outputs (see Section 6.3)
• Locking and unlocking the front panel buttons (see Section 6.4)
• Generating a test pattern (see Section 6.5)
6.1 Switching an Input to an Output
To switch an input to an output, (for example, Input 4 to Output 2):
• Press the Input 4 button in the bottom Output (To OUT 2) row.
The LED lights red and Input 4 is switched to Output 2
6.2 Acquiring an EDID from an Output
You can acquire the EDID from OUT 1 or OUT 2 and copy it to any or all of the four
inputs to be stored in non-volatile memory. You can also reset any or all of the
inputs to the default EDID.
To copy the EDID from an Output to one or more Inputs:
1. Press the EDID button to enter the EDID setting mode.
The EDID button lights.
Note: If there is no button activity for 10 seconds, the device automatically exits the
EDID setting mode to normal operation, the EDID button no longer lights and any
changes made are lost.
2. From the To OUT 1 (top) row, press each of the Inputs to which you want to
copy the EDID from Output 1.
Each selected Input LED lights.
To Next Page
Loading...
Need help?
General
