Kramer VS-42UHD User Manual

VS-42UHD - Protocol 3000 43
13.3 Protocol 3000 Commands
This section includes the following commands:
• System Commands (see Section 13.3.1
)
• Switching/Routing Commands (see Section 13.3.2)
• Video Commands (see Section 13.3.3)
• Communication Commands (see Section 13.3.4)
• EDID Handling Commands (see Section 13.3.5)
13.3.1 System Commands
Command Description
#
Protocol handshaking (system mandatory)
BUILD-DATE
Get device build date (system mandatory)
FACTORY
Reset to factory default configuration
HELP
Get command list (system mandatory)
LOCK-FP
Set/get front panel lock
MODEL
Get device model (system mandatory)
PROT-VER
Get device protocol version (system mandatory)
RESET
Reset device (system mandatory)
SN
Get device serial number (system mandatory)
VERSION
Get device firmware version (system mandatory)
DISPLAY
Get output HPD status (system)
HDCP-MOD
Set/get HDCP mode (system)
HDCP-STAT
Get HDCP signal status (system)
NAME
Set/get machine (DNS) name (system – Ethernet)
NAME-RST
Reset machine (DNS) name to factory default (system – Ethernet)
PRIO?
Get priority for an input (system)
SIGNAL
Get input signal lock status (system)

Kramer VS-42UHD Specifications

General

Brand	Kramer
Model	VS-42UHD
Category	Matrix Switcher
Language	English