Kramer VS-42UHD - 13.3.4 Communication Commands

60 VS-42UHD - Protocol 3000
13.3.4 Communication Commands
Command Description
ETH-PORT
Set/get Ethernet port protocol
NET-DHCP
Set/get DHCP mode
NET-GATE
Set/get gateway IP
NET-IP
Set/get IP address
NET-MAC
Get MAC address
NET-MASK
Set/get subnet mask
13.3.4.1 ETH-PORT
Functions Permission Transparency
Set:
ETH-PORT
Administrator
Public
Get:
ETH-PORT?
End User Public
Description Syntax
Set: Set Ethernet port protocol
#ETH-PORTSP
portType,ETHPort
CR
Get: Get Ethernet port protocol
#ETH-PORT?SP
portType
CR
Response
~nn@ETH-PORTSPportType,ETHPortCR LF
Parameters
portType – string of 3 letters indicating the port type: TCP, UDP
ETHPort
– TCP / UDP port number: 0-65565
Response Triggers
Notes
If the port number you enter is already in use, an error is returned
The port number must be within the following range: 0-(2^16-1)
K-Config Example
Set the Ethernet port protocol for TCP to port 12457:
“#ETH-PORT TCP,12457”,0x0D