VS-42UHD - Protocol 3000 39
13 Protocol 3000
The VS-42UHD can be operated using the Kramer Protocol 3000 serial
commands. The command framing varies according to how you interface with the
VS-42UHD. For example, a basic video input switching command that routes a
layer 1 video signal to HDMI out 1 from HDMI input 2 (ROUTE 1,1,2), is entered
as follows:
• Terminal communication software, such as Hercules:
The framing of the command varies according to the terminal
communication software.
• K-Touch Builder (Kramer software):
To Next Page
Loading...
Need help?
General
