Why aren't the turn signal, brake light, and horn working on my KTM RC 200 Motorcycle?
If the turn signal, brake light, and horn on your KTM Motorcycle are not functional, fuse 6 may be blown, so replace it.
General| Displacement | 199.5 cc |
|---|---|
| Transmission | 6-speed |
| Fuel System | Electronic Fuel Injection |
| Rear Suspension | WP APEX Monoshock |
| Bore x Stroke | 72 mm x 49 mm |
| Compression Ratio | 11.5:1 |
| Max Power | 25 PS @ 10000 rpm |
| Max Torque | 19.2 Nm @ 8000 rpm |
| Front Brake | 300 mm disc |
| Rear Brake | 230 mm disc |
| Fuel Tank Capacity | 13.7 liters |
| Kerb Weight | 160 kg |
| Front Suspension | WP APEX 43 mm Upside Down |
| ABS | Dual Channel |
| Tyre Front | 110/70-17 |
| Tyre Rear | 150/60-R17 |
| Ground Clearance | 157 mm |
| Engine Type | Single Cylinder, Liquid Cooled |
General safety instructions and the importance of reading the manual.
Explains danger, warning, caution, and note symbols.
Prohibits tampering with the noise control system and lists prohibited acts.
Covers safe operation, including avoiding impairment and ensuring ventilation.
Emphasizes the importance of wearing protective clothing for safety.
Highlights the importance of proper service for operation and wear prevention.
Identifies the location and states of the emergency OFF switch.
Explains the location and states of the ignition and steering lock.
Details the procedure for locking the motorcycle's steering.
Details the procedure for unlocking the motorcycle's steering.
Describes various warning notes displayed on the info display.
Details the meaning of various indicator lamps on the instrument cluster.
Describes the different segments and information shown on the instrument display.
Provides essential advice and warnings for the initial use of the motorcycle.
Guides on the proper engine running-in procedure and maximum engine speed.
Covers warnings and guidelines for safely loading the vehicle.
Lists essential checks and maintenance before every trip.
Details the steps and safety precautions for starting the motorcycle.
Explains how to start moving the motorcycle from a standstill.
Covers gear shifting, riding techniques, and important warnings.
Provides detailed instructions and warnings on using the brakes effectively.
Guides on safe stopping and parking procedures, including security.
Details the procedure for refueling, including safety warnings.
Lists required maintenance tasks at different intervals.
Explains how to adjust rear shock absorber spring preload for different conditions.
Explains how to check and the importance of correct chain tension.
Details the procedure for adjusting the chain tension.
Explains the ABS unit, sensors, and its safety function.
Details how to check brake disc thickness and for damage.
Explains how to check the front brake fluid level and safety warnings.
Details the procedure for adding front brake fluid, including safety.
Explains how to check front brake lining thickness and warnings.
Details how to check the rear brake fluid level and safety warnings.
Explains how to add rear brake fluid, including safety.
Details how to check rear brake lining thickness and warnings.
Explains how to check free travel of the foot brake lever.
Details how to adjust the free travel of the foot brake lever.
Details how to remove the front wheel, including safety warnings.
Details how to install the front wheel, including safety warnings.
Details how to remove the rear wheel, including safety warnings.
Details how to install the rear wheel, including safety warnings.
Guides on checking tire condition, damage, and age.
Explains how to check and correct tire air pressure for optimal performance.
Details the procedure for removing the battery, including safety warnings.
Details the procedure for installing the battery.
Provides instructions and safety warnings for recharging the battery.
Explains how to change ABS fuses on the RC 125 model.
Details how to change fuses for various power consumers.
Explains how to check the coolant level in the compensating tank, with warnings.
Details checking antifreeze and coolant levels and specifications.
Guides on filling and bleeding the cooling system, with safety warnings.
Explains how to check the engine oil level and the correct markings.
Details the process for changing engine oil and filter, with safety warnings.
Explains how to add engine oil, including types and quantities.
Lists steps for preparing the motorcycle for longer-term storage.
To Next Page
