10 TUNING THE CHASSIS 34
10.15 Adjusting the vehicle level at the rear x
Warning
Danger of accidents Modifications to the suspension settings can seriously alter the vehicle's ride behavior.
– Following modifications, ride slowly at first to get the feel of the new ride behavior.
L00551-10
– Take the weight off the rear wheel and swingarm.
–
Loosen nut
1
.
–
Distance
A
must not exceed the specified value.
Guideline
Distance
A
≤ 12 mm (≤ 0.47 in)
L00533-11
–
Turn damper
2
in the desired position.
Guideline
Standard shock absorber length 310 mm (12.2 in)
Shock absorber length min... max 306.5… 313.5 mm (12.067…
12.342 in)
Maximum adjustment range between
HIGH - LOW
7 mm (0.28 in)
Info
The chassis height can be adjusted in both directions.
L00533-12
–
Tighten nut
1
.
Guideline
Nut, shock absorber frame height M16x1 20 Nm
(14.8 lbf ft)