FC3160TCD-3560TCD-4060TCD
72
10. - Optional equipment
KN284DGB B
Mower conditioner
With skids shoes in low position:
With skid shoes in high position:
The maximum cutting height (L1 =
95 mm (3.74’’)) is obtained when the discs are
parallel to the ground.
The minimum cutting height must not be below
(L2 = 55 mm (2.17’’)).
Too low a cutting height can lead to:
- Excessive disc and knife wear.
- Crop being contaminated by soil.
- Delay in regrowth.
- Risk of tearing out the grass cover in
wet conditions.
The maximum cutting height (L1 =
150 mm (5.91’’)) is obtained when the discs are
parallel to the ground.
The minimum cutting height must not be below
(L2 = 90 mm (3.54’’)).
To Next Page
Loading...
